View T520H157M035APE0507280_8874487.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 1 benefts ? h ighest energy per unit volume ? s table capacitance across temperature and voltage ? n o aging effects ? l ow esr values ? h igh frequency capacitance retention ? h igh ripple handling ? 1 00% accelerated steady state aging ? 1 00% surge current tested ? 1 00% thermal shock tested (t545 series only) ? h alogen-free epoxy/rohs compliant applications typical applications include enterprise storage, networking, server, mobile, client storage, and client computing. solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc overview kemet's organic capacitors (ko-cap) are preferred solutions for applications requiring power loss protection (hold-up) or maximum power effciency of a circuit when board space is limited. desired benefts include high energy density, stable capacitance with applied voltage and temperature, and no aging effects. the conductive polymer cathode of these solid electrolytic capacitors provide very low esr and higher capacitance retention at high frequencies. unlike liquid electrolyte-based capacitors, kemet's polymer capacitors have a very long operational life and high ripple current capabilities. capacitors from t520, t521 and t523 series are commonly used in these applications. the t545 and t548 series were introduced to meet specifc needs for a subsegment of solid state drives. t520/t521/t545 t523/t548 one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 2 2 environmental compliance ? rohs compliant (6/6) according to directive 2002/95/ec when ordered with 100% sn solder or ni-pd-au ? halogen-free ? epoxy compliant with ul94 vC0 k-sim for a detailed analysis of specifc part numbers, please visit ksim.kemet.com to access kemets k-sim software. kemet k-sim is designed to simulate behavior of components with respect to frequency, ambient temperature, and dc bias levels. ordering information t 548 v 157 m 016 a t e050 capacitor class series case size capacitance code (pf) capacitance tolerance rated voltage (vdc) failure rate/ design termination finish esr packaging (c-spec) t = tantalum 520 = low voltage 521 = high voltage 523 = facedown terminal 545 = high energy 548 = high energy, facedown terminal b h j m o t v w x y first two digits represent signifcant fgures. third digit specifes number of zeros. m = 20% 006 = 6.3 010 = 10 016 = 16 020 = 20 035 = 35 a = n/a t = 100% matte tin (sn) plated p* = ni-pd-au plated esr in m blank = 7" reel 7280 = 13"reel * p termination only available on t523/t548 part numbers performance characteristics item performance characteristics operating temperature ?55c to 85c/105c (refer to part number in table 1 for maximum temperature rating) rated capacitance range 22 f C 1,500 f at 120 hz/25c capacitance tolerance m tolerance (20%) rated voltage range 6.3 C 35 vdc df (120 hz) refer to part number in table 1 for electrical specifcation esr (100 khz) refer to part number in table 1 for electrical specifcation leakage current 0.1 cv (a) at rated voltage after 5 minutes (refer to part number in table 1 for electrical specifcation) solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 3 3 qualifcation test condition characteristics endurance 85c or 105c at rated voltage, 2,000 hours** c/c within ?20/+10% of initial value df within initial limit dcl within 1.25 x initial limit esr within 2.0 x initial limit storage life 85c or 105c at 0 volts, 2,000 hours** c/c within ?20%/+10% of initial value df within initial limits dcl within 1.25 x initial limit esr within 2.0 x initial limit humidity 60c, 90% rh, no load, 500 hours c/c within ?5% /+35% of initial value df within initial limit dcl within 5.0 x initial limit esr within 2.0 x initial limit temperature stability extreme temperature exposure at a succession of continuous steps at +25oc, -55oc, +25oc, +85oc, +105c**, +25oc +25c ?55c +25c +85c +105oc* * +25c c/c il* +/?20% +/?10% +/?20% +/-30% +/?10% df il il il 1.2 x il 1.5 x il il dcl il n/a il 10 x il 10 x il il surge voltage 85c or 105c, 1.32 x rated voltage, 1,000 cycles** c/c within ?20/+10% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/ vibration mil-std-202, method 213, condition i, 100g peak c/c within 10% of initial value (within initial limits for t527 series) df within initial limits dcl within initial limits * il = initial limit ** refer to table 1 - ratings & part number reference for temperature classifcation. if temperature classifcation is 85c, the 105c step is not performed for the temperature stability test. solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 4 4 dimensions C millimeters (inches) metric will govern for t520/t521/t545 h x t b b f a l r p side view anode (+) end view bottom view cathode (-) end view w s s termination cutout at kemet's option, either end glue pad shape/design at kemet's option kemet eia l w h f 0.1 (0.004) s 0.3 (0.012) b 0.15 (ref) 0.006 x (ref) p (ref) t (ref) a (min) total weight (mg) t 3528-12 3.50.2 (0.1380.008) 2.80.2 (0.1100.008) 1.10.1 (0.0430.004) 2.2 (0.087) 0.80 (0.032) n/a 0.05 (0.002) n/a 0.13 (0.005) 1.9 (0.075) 55 m 3528-15 3.50.2 (0.1380.008) 2.80.2 (0.1100.008) 1.40.1 (0.0550.004) 2.2 (0.087) 0.8 (0.031) n/a 0.05 (0.002) n/a 0.13 (0.005) 1.1 (0.043) 98 b 3528-21 3.50.2 (0.1380.008) 2.80.2 (0.1100.008) 1.90.2 (0.0750.008) 2.2 (0.087) 0.80 (0.032) 0.4 (0.016) 0.100.10 (0.0040.004) 0.5 (0.020) 0.13 (0.005) 1.9 (0.075) 95 w 7343-15 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 1.40.1 (0.0550.004) 2.4 (0.094) 1.30 (0.051) n/a 0.05 (0.002) n/a 0.13 (0.005) 3.6 (0.142) 223 v 7343-20 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 1.90.1 (0.0750.004) 2.4 (0.094) 1.30 (0.051) n/a 0.05 (0.002) n/a 0.13 (0.005) 3.6 (0.142) 274 y 7343-40 7.3 0.3 (0.2870.012) 4.30.3 (0.1690.012) 3.80.2 (0.1500.008) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.100.10 (0.0040.004) 1.7 (0.067) 0.13 (0.005) 3.8 (0.150) 494 x 7343-43 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 4.00.3 (0.1570.012) 2.4 (0.094) 1.30 (0.051) 0.5 (0.020) 0.100.10 (0.0040.004) 1.7 (0.067) 0.13 (0.005) 3.6 0.142) 554 j 7360-15 7.30.3 (0.2870.012) 6.00.3 (0.2360.012) 1.40.1 (0.0550.004) 4.1 (0.161) 1.30 (0.051) n/a 0.100.10 (0.0040.004) n/a 0.13 (0.005) 3.3 (0.130) 263 h 7360-20 7.30.3 (0.2870.012) 6.00.3 (0.2360.012) 1.90.1 (0.0750.004) 4.1 (0.161) 1.3 (0.051) n/a 0.100.10 (0.0040.004) n/a 0.13 (0.005) 3.3 (0.130) 385 o 7360-43 7.30.3 (0.2870.012) 6.00.3 (0.2360.012) 4.00.3 (0.1570.012) 4.1 (0.161) 1.3 (0.051) n/a 0.100.10 (0.0040.004) n/a 0.13 (0.005) 3.3 (0.130) 696 for t523/t548 side view bottom view end view f s s w l h kemet eia l w h f 0.1 (0.004) s 0.3 (0.012) total weight (mg) w 7343-15 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 1.40.1 (0.0550.004) 2.4 (0.094) 1.3 (0.051) 223 j 7360-15 7.30.3 (0.2870.012) 6.00.3 (0.2360.012) 1.40.1 (0.0550.004) 4.45 (0.175) 1.6 (0.063) 263 v 7343-20 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 1.90.1 (0.0750.004) 2.4 (0.094) 1.3 (0.051) 274 h 7360-20 7.30.3 (0.2870.012) 6.00.3 (0.2360.012) 1.90.1 (0.0750.004) 4.45 (0.175) 1.6 (0.063) 385 solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 5 5 table 1 C ratings & part number reference ? bold text denotes "under development." engineeiring samples available upon request. ? refer to ordering information for additional detail. ? energy = ? * nominal cap * (application voltage^2 * dropout voltage^2)/1000; a 3 v dropout voltage was used for the calculation. rated voltage/ application voltage case size/ case height kemet part number energy (?cva 2 ) C (?cvd 2 ) nominal capacitance maximum df at 25c, 120 hz maximum esr at 25c, 100 khz maximum dc leakage at 25c, vr, 5 min charge time maximum allowable ripple current at 45c, 100 khz msl maximum operating temperature vdc eia/mm mj f % m a ma c 6.3/5.7 3528/1.2 t520t107m006ate070 1.2 100 10 70 63.0 1230 3 105 6.3/5.7 3528/1.2 t520t157m006ate070 1.7 150 10 70 94.5 1230 3 105 16/12.8 3528/1.2 t521t336m016ate070 2.6 33 10 70 52.8 1230 3 105 6.3/5.7 3528/1.5 t520m157m006ate070 1.7 150 10 70 94.5 1310 3 105 6.3/5.7 7343/1.5 t545w477m006ate035 5.4 470 10 35 296.1 2270 3 105 6.3/5.7 7343/1.5 t545w477m006ate045 5.4 470 10 45 296.1 2000 3 105 6.3/5.7 7343/1.5 t545w477m006ate055 5.4 470 10 55 296.1 1810 3 105 6.3/5.7 7343/1.5 t548w687m006ape055 7.9 680 10 55 428.4 2680 4 85 16/12.8 7343/1.5 t545w476m016ate045 3.6 47 10 45 75.2 2000 3 105 16/12.8 7343/1.5 t548w686m016ape050 5.3 68 10 50 108.8 2820 4 85 16/12.8 7343/1.5 t548w107m016ape050 7.7 100 10 50 160.0 2820 4 85 20/16.0 7343/1.5 t545w476m020ate045 5.8 47 10 45 94.0 2000 3 105 20/16.0 7343/1.5 t545w476m020ate055 5.8 47 10 55 94.0 1810 3 105 35/28.0 7343/1.5 t548w476m035ape090 18.2 47 10 90 164.5 2100 4 85 10/9.0 7360/1.5 t520j337m010ate070 9.1 330 10 70 330.0 1700 4 85 16/12.8 7360/1.5 t523j227m016ape100 17.0 220 10 100 352.0 2100 4 85 6.3/5.7 3528/2.0 t520b227m006ate070 2.5 220 10 70 138.6 1350 3 105 16/12.8 3528/2.0 t521b226m016ate070 1.7 22 10 70 35.2 1350 3 105 20/16.0 3528/2.0 t521b226m020ate070 2.7 22 10 70 44.0 1350 3 105 6.3/5.7 7343/2.0 t545v337m006ate045 3.8 330 10 45 207.9 2040 3 105 6.3/5.7 7343/2.0 t545v477m006ate055 5.4 470 10 55 296.1 1850 3 105 6.3/5.7 7343/2.0 t548v108m006ape055 11.6 1000 10 55 630.0 2740 4 85 10/9.0 7343/2.0 t545v227m010ate045 7.9 220 10 45 220.0 2040 3 105 16/12.8 7343/2.0 t545v476m016ate045 3.6 47 10 45 75.2 2040 3 105 16/12.8 7343/2.0 t545v476m016ate070 3.6 47 10 70 75.2 1640 3 105 16/12.8 7343/2.0 t545v107m016ate050 7.7 100 10 50 160.0 1940 3 105 16/12.8 7343/2.0 t548v157m016ape050 11.6 150 10 50 240.0 2870 4 85 20/16.0 7343/2.0 t545v476m020ate070 5.8 47 10 70 94.0 1640 3 105 6.3/5.7 7360/2.0 t545h108m006ate055 11.6 1000 20 55 630.0 1850 3 85 6.3/5.7 7360/2.0 t545h158m006ate035 17.4 1500 20 35 945.0 2320 3 85 6.3/5.7 7360/2.0 t545h158m006ate055 17.4 1500 20 55 945.0 1850 3 85 1 0/9.0 7360/2.0 t520h827m010ate055 29.5 820 10 55 820.0 1910 4 85 16/12.8 7360/2.0 t545h187m016ate055 13.9 180 20 55 288.0 1910 3 85 16/12.8 7360/2.0 t548h337m016ape070 25.5 330 10 70 528.0 2510 4 85 16/12.8 7360/2.0 t523h477m016ape070 36.4 470 10 70 752.0 2510 4 85 6.3/5.7 7343/4.3 t520x687m006ate025 7.9 680 10 25 428.4 3150 3 105 10/9.0 7343/4.0 t545y337m010ate035 11.9 330 10 35 330.0 2630 3 105 16/12.8 7343/4.3 t545x157m016ate040 11.6 150 10 40 240.0 2490 3 105 16/12.8 7343/4.3 t545x227m016ate035 17.0 220 10 35 352.0 2660 3 105 16/12.8 7343/4.3 t545x337m016ate025 25.5 330 10 25 528.0 3150 3 105 16/12.8 7360/4.3 t521o477m016ate025 36.4 470 10 25 752.0 3470 3 105 vdc eia/mm mj f % m a ma c rated voltage/ application voltage case size/ case height kemet part number energy nominal capacitance maximum df at 25c, 120 hz maximum esr at 25c, 100 khz maximum dc leakage at 25c, vr, 5 min charge time maximum allowable ripple current at 45c, 100 khz msl maximum operating temp solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 6 6 derating guidelines 100% 95% 90% 85% 80% 75% % rated voltage 70% 65% 60% 55% 50% ? 55 25 45 temperature (oc) 85 105 recommended application voltage v r > 10 v recommended application voltage v r 10 v rated voltage recommended application voltage kocaps are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. while the kocap can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability which should be demonstrated with data. a voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. since most applications do require long term reliability, kemet recommends that designers consider a voltage derating, according the graphic above, for the maximum steady state voltage. voltage rating maximum recommended steady state voltage ?55c to 105c 6.3 v vr 10 v 90% of vr 10 v < vr 80% of vr : r ipki solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 7 7 ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria: a. the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. b . the negative peak ac voltage, in combination with bias voltage, if any, must not exceed the allowable limits specifed for reverse voltage. the maximum power dissipation by case size can be determined using the below table. temperature compensation multipliers for maximum ripple current t 45c 45 c < t 85c 85c < t 105c t= environmental temperature using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = z p max/r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation(watts) r = esr at specifed frequency (ohms) z = impedance at specifed frequency (ohms) refer to part number listings for permittable arms limits. case code eia case code maximum power dissipation (p max) mwatts at 45c with +30c rise for t520/t521/t545 for t523/t548 t 3528-12 105 n/a m 3528-15 120 n/a b 3528-21 127 n/a w 7343-15 180 395 v 7343-20 187 410 y 7343-40 241 n/a x 7343-43 247 n/a j 7360-15 200 440 h 7360-20 200 440 o 7360-43 300 n/a the maximum power dissipation rating must be reduced with increasing environmental operating temperatures. refer to the temperature compensation multiplier table for details. solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 8 8 surge voltage surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. the surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot be part of the application voltage. surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. the parts are charged through a 33 ohm resistor for 30 seconds and then discharged though a 33 ohm resistor for each cycle. rated voltage (v) surge voltage (v) C55oc to 105oc 2.5 3.3 6.3 8.3 10 13.2 16 21.1 20 26.4 25 33.0 35 46.2 6vw:spxek polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. these devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. temperature permissible transient reverse voltage 25c 15% of rated voltage 55c 10% of rated voltage 85c 5% of rated voltage 105c 3% of rated voltage 125c* 1% of rated voltage *for series rated to 125c solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 9 9 table 2 C land dimensions/courtyard for t520/t521/t545 kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia w l s v1 v2 w l s v1 v2 w l s v1 v2 t 3528C12 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 b 3528C21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 m 3528-15 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 w 7343C15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 v 7343C20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 y1 7343C40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 x1 7343C43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 j 7360-15 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 h 7360-20 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 o1 7360-43 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component desity product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). 1 height of these chips may create problems in wave soldering. l s w w l v1 v2 grid placement courtyard solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 10 10 table 2 C land dimensions/courtyard cont'd for t523/t548 kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia w l s v1 v2 w l s v1 v2 w l s v1 v2 w 7343-15 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 v 7343-20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 j 7360-15 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 h 7360-20 4.60 3.07 3.07 10.22 7.30 4.48 2.67 3.27 9.12 6.80 4.38 2.29 3.43 8.26 6.54 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component desity product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). l s w w l v1 v2 grid placement courtyard solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 11 11 soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. please note that although the x/7343C43 and o/7360-43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be removed immediately. wiping the edges of a chip and heating the top surface is not recommended. profle feature pb-free assembly preheat/soak temperature minimum (t smin ) 150c temperature maximum (t smax ) 200c time (t s ) from t smin to t smax ) 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum liquidous temperature (t l ) 217c time above liquidous (t l ) 60 C 150 seconds peak temperature (t p ) 250c* 260c** time within 5c of maximum peak temperature (t p ) 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum time 25c to peak temperature 8 minutes maximum note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size o, y, and x **case size b, h, j, m, t, v, and w storage all ko-cap series are shipped in moisture barrier bags (mbbs) with desiccant and?humidity indicator card (hic). these parts are classifed as msl3 (moisture sensitivity level 3) or msl4 (moisture sensitivity level 4) per ipc/jedec j-std-020 and packaged per ipc/jedec jCstdC033. refer to table 1 for part type specifcation. msl3 specifes a foor time of 168h at 30c maximum temperature and 60% relative humidity. msl4 specifes a foor time of 72h at 30c maximum temperature and 60% relative humidity. unused capacitors should be sealed in a mbb with fresh desiccant. calculated shelf life in sealed bag: C 12 months from bag seal date in a storage environment of < 40oc and humidity < 90% rh C 24 months from bag seal date in a storage environment of < 30oc and humidity < 70% rh if baking is required, refer to ipc/jedec jCstdC033 for bake procedure time te mp erature t smin 25 t smax t l t p maximum ramp up rate = 3oc/sec maximum ramp down rate = 6oc/sec t p t l t s 25oc to peak solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 12 12 construction t520/t521/t545 leadframe (- cathode) leadframe (+ anode) wire molded epoxy case molded epoxy case weld (to attach wire) silver adhesive polarity stripe (+) polarity bevel (+) detailed cross section wire tantalum ta 2 o 5 dielectric (first layer) carbon (third layer) silver paint (fourth layer) polymer (second layer) t523/t548 leadframe (- cathode) leadframe (+ anode) tantalum wire weld (to attach wire) detailed cross section tantalum wire tantalum polymer (second layer) carbon (third layer) silver paint (fourth layer) polarity stripe (+) molded epoxy case ta 2 o 5 dielectric (first layer) spacer solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 13 13 capacitor marking polarity indicator (+) rated voltage picofarad code kemet id date code* * 621 = 21 st week of 2016 date code * 1 st digit = last number of year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 14 14 tape & reel packaging information kemets molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481: embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 b 3528-21 8 2,000 8,000 w 7343-15 12 1,000 3,000 v 7343-20 12 1,000 3,000 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 j 7360-15 12 1,000 3,000 h 7360-20 12 1,000 3,000 o 7360-43 12 500 2,000 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 15 15 figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre eling cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] 8efpii)qfswwih4pewxmg 'evvmiv8eti(mqirwmsrw metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059+0.004/-0.0) 1.0 (0.039) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.05 (0.0790.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm 2.00.1 (0.0790.059) variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 , b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.50.05 (0.1380.002) 2.00.05 or 4.00.10 (0.0790.002 or 0.1570.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.50.05 (0.2170.002) 2.00.05 (0.0790.002) or 4.00.10 (0.1570.004) or 8.00.10 (0.3150.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.10 (0.2950.004) 4.00.10 (0.1570.004) to 12.00.10 (0.4720.004) 8.0 (0.315) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape, with or without components, shall pass around r without damage (see figure 4). 3. if s 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481Cd, paragraph 4.3, section b). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 3). (e) see addendum in eia standard 481Cd for standards relating to more precise taping requirements. solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 16 16 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624. figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t center line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tap e 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 4 C bending radius r r b en ding radius e mbo sse d carrier p unc hed ca rrier solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 17 17 figure 5 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w3 (includes flange distortion at outer edge) w2 (m ea sured at hu b) w1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n 8efpii6iip(mqirwmsrw metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 1780.20 (7.0080.008) or 3300.20 (13.0000.008) 1.5 (0.059) 13.0+0.5/-0.2 (0.521+0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4+1.5/?0.0 (0.331+0.059/?0.0) 12.4+2.0/?0.0 (0.488+0.078/?0.0) 16.4+2.0/?0.0 (0.646+0.078/?0.0) solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 18 18 figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t 2079_ssd ? 9/27/2016 19 19 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. kemet is a registered trademark of kemet electronics corporation. solid state drives/high energy applications polymer electrolytic (ko-cap ? ), 6.3 C 35 vdc

▲Up To Search▲

Price & Availability of T520H157M035APE0507280

	To Download T520H157M035APE0507280 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .